Staged Electric Heat Module
This Electric Heat Module has been designed so that there is easy access to either side of the electric coil. Over sized doors offer plenty of room through which to clean and maintain the electric coil from either side of the housing. Modular design all so lends its self to easier installations since modules bolt together on location. Electric heater modules are used for tempering make up air for installations requiring frequent air changes. The units are rated from 10 to 235KW and from 400 to 22,000 CFM’s, depending on heating requirements. The heaters are intended for indoor or outdoor installations in commercial kitchens, factories, foundries and similar commercial and industrial occupancies.
- G90 galvanized construction.
- Modular design.
- Staged heating control.
- 120 volt control transformer, with single point electrical connection.
- Controls for stand alone or integrated operations.
- Electric coil safety equipment.
- Insulated housing.
- Access doors on both sides of the unit.
- Lifting points.
- Airflow proving switch.
- Temperature control system.
- Coil observation port.
- High temperature limit.
- 1" thick insulation installed inside coil module housing.
Additional Information
Electric Insert Specifications
-
Electrical Information
- Size 1 Housing – 10KW, 208V Insert
- Size 1 Housing – 20KW, 208V Insert
- Size 1 Housing – 20KW, 460V Insert
- Size 1 Housing – 36KW, 460V Insert
- Size 2 Housing – 36KW, 208V Insert
- Size 2 Housing – 69KW, 460V Insert
- Size 3 Housing – 83KW, 460V Insert
- Size 4 Housing – 155KW, 460V Insert
- Size 5 Housing – 235KW, 460V Insert
-
Dimensional Information
- Size 1 Housing – 10KW, 208V Insert
- Size 1 Housing – 20KW, 208V Insert
- Size 1 Housing – 20KW, 460V Insert
- Size 1 Housing – 36KW, 460V Insert
- Size 2 Housing – 36KW, 208V Insert
- Size 2 Housing – 69KW, 460V Insert
- Size 3 Housing – 83KW, 460V Insert
- Size 4 Housing – 155KW, 460V Insert
- Size 5 Housing – 235KW, 460V Insert