FXB Series
Heat & Condensate Vent Hoods
Exhaust only hoods to be used over equipment not producing grease laden vapors. Hoods have fully welded 10 gauge corner hanging angle, and hoods over 12' have additional fully welded 10 gauge center hanging angles. Hat channels and trim strips are installed on top of the hood and have been designed to make the top of the hood rigid. This allows installation without damaging the top roof panels. This series of hoods has been designed using the latest in solid modeling software. The manufacturing and assembly processes being used are state of the art. Each hood goes through a rigorous computerized quality control system that is designed to make sure the very best products are shipped to the customer.
- Single wall or double wall construction.
- Available in wall type or one-piece island.
- 430 stainless used on standard construction hoods.
- 304 stainless used on hoods with full perimeter gutters.
- Hoods with full perimeter gutters have a drain.
- Hoods that have full perimeter gutters have welded corners.
- Double wall hoods have insulated fronts.
- Double wall hoods offer rigidity and help guide moisture laden air and heat to the riser and away from the front of the hood.
- Incandescent, LED and fluorescent lights are available.
- Hoods are offered in multiple widths: 24”, 30”, 36", 42", 48", 54", 60", 66”, 72”.
- Hoods are offered in multiple lengths between 24" and a maximum of 120".
- Hoods are offered in multiple heights: 12", 24", and 30".
- ETL Sanitation listed and ETL listed.
The FXB Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.
Models FXB are ETL Listed under file number 102900319PRT-001 and complies with UL710, ULC710 and ULC-S646 Standard
- Full perimeter gutter with drain.
- Double wall fronts.
- Lights; incandescent, LED and fluorescent.
- Material options, 304 and 430 stainless.
- PSP (perforated supply plenum) for make-up air applications.
- Custom risers and filter configurations.
- Removable Condensation Baffles, for use in High condensate applications
- Single Wall Section View
- Single Wall with gutter Section View
- Single Wall with PSP Section View
- Single Wall with gutter and PSP Section View
- Single Wall with gutter and REM baffles
- Single Wall with gutter and (1) REM baffle
- Double Wall Section View
- Double Wall with gutter Section View
- Double Wall with PSP Section View
- Double Wall with gutter and PSP Section View
- Double Wall with gutter and (1) REM baffle
- Single Wall Isometric View
- Single Wall with gutter Isometric View
- Single Wall with PSP Isometric View
- Single Wall with gutter and PSP Isometric View
- Double Wall Isometric View
- Double Wall with gutter Isometric View
- Double Wall with PSP Isometric View
- Double Wall with gutter and PSP Isometric View
| Configuration | Exhaust CFM/Ft. | Exhaust CFM/Ft. |
|---|---|---|
| Wall & 1-piece island | 100 | 150 |